Texas-memory-systems RamSan-325/325c Manuel d'utilisateur télécharger pdf (Page 88)

RamSan-325/325c User’s Manual - 84 -

Via Text Management

• From the Telnet Main Menu, select “Controller setup”

• Select “Select controller”

• Choose a controller from the sub-menu and press [ENTER]

Figure 7-2: Controller Setup via Text Management Interface

The top of this menu indicates the controller’s current settings.

To change the topology:

• Select “Change topology”

• Choose the controller’s topology from the sub-menu and press

[ENTER]

To change the link speed:

• Select “Change link speed”

• Choose the controller’s link speed from the sub-menu and press

[ENTER]

All modifications are visible at the top of the menu.

To save any changes:

• Select “Save changes and exit”

Generally, selecting auto-detect for topology and link speed provides you

with the proper settings for your system. If the Controller Setup screen

displays these settings as “Unkn” (See Figure 7-3: Auto-Detect Error)

once you have saved the changes, you must configure the link speed and

topology manually.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 120 121

Pas de commentaire

Texas-memory-systems RamSan-325/325c Manuel d'utilisateur Page 88