Texas-memory-systems RamSan-325/325c Manuel d'utilisateur télécharger pdf (Page 115)

RamSan-325/325c User’s Manual - 111 -

Appendix D – Serial Port Settings

You may connect to the management port with either a DB-9 serial cable or an RJ-45

Ethernet cable. The following settings apply to the serial port.

Port Settings

To connect to the RamSan using a serial port connection, use a dumb terminal or a

terminal emulation program such as Windows™ HyperTerminal. Set your baud rate

to 9600 with 8 data bits, 1 stop bit, no parity, and no flow control.

To connect to the serial port, use the DB-9 non-null serial cable supplied with the

system.

Default Account

Use the following default account information to access the RamSan through the

serial port:

ssd Login: admin

Pin Out

The RamSan serial port has the following pin out settings:

Figure D-0-1: Serial Port Pin Out

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 121

Pas de commentaire

Texas-memory-systems RamSan-325/325c Manuel d'utilisateur Page 115